Taytools 279205 Lapping Microfinishing Sharpening

June 07,2024

This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40. 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets. Float glass will accommodate a half sheet of lapping film. Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.

3M 7 Sheet Lapping Film Set — Taylor Toolworks

3M™ 10 Sheet Pack Aluminum Oxide 8-1/2 x 11 Microfinishing/Lapping Film PSA

Two sheets 1 micron (14.000 grit) lapping film 8.5 x 11 PSA (pressure sensitive adhesive) backing 3 mil high-strength polyester film backing

2 Sheet Bundle 1 Micron (14,000 Grit) PSA Lapping Microfinishing Film Aluminum Oxide (AO) 8 1/2” x 11” 265Xx2

This lapping film is 100% made in the USA by 3M™. These microfinishing lapping sheets were developed for industrial applications and can be used to

3M™ 10 Sheet Set Non-PSA Lapping Microfinishing Film (AO) 8-1/2” x 11”

3M (TM) 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO: : Tools & Home Improvement

This is a 2 pieces set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System Float

Taytools 279151 Two Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

One Sheet .0.3 Micron (60,000 Grit) PSA Lapping Microfinishing Film Aluminum Oxide (AO) 8 1/2” x 11” 268Xx1

GOINGMAKE Honing Guide System for Woodworking Planes and Chisels - Chisel Sharpening Kit With 5/32 to 3 Holder Guide : Tools & Home Improvement

Taytools 279168 Three Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System